An early birthday present.

[martrix]

You would be surprised. I thought the same thing until seeing some.

Once the mesh is painted black, it virtually disappears.

have you come across any pics on the web?

[Madbugger]

http://picasaweb.google.com/SupremeI...shPoolFencing#

These pics don't do it justice. I will have 40mm RHS frame top and bottom as well as posts. The one that I went and looked at similar to what I am going to build looks much better than these pics.

[Madbugger]

Just done some final costings - looks like I'm back to a standard type pool fence.

Shows the left hand (deep) end of fence where it needs to step down some retainer walls.





Shows pool from above. RHS is boundary fence onto a reserve. The colorbond fence will have to be replaced with a higher one and have 2 gates moved to an area just of the top of the pic.







Fairly painful place to install, shit line and storm water run right thru middle of pool, both have to be re located.

Easement runs on LHS of pool roughly following the brown area, but extending on the same line about 2 metres further out. We wanted the pool about 2 metres further to the left, but no can do.

Fall of block is around 300mm dropping from left to right and about 400-500 mm from edge of retainer wall to far side of pool.

Have tentitavely decided of stencil/stamped concrete at this stage. Indicated by cream area.